DBDOC Online Help

Learn about DBDOC

Documentation

MSDVDR: Multistate Device Driver [FC129]

MSDVDR: Multistate Device Driver [FC129]


Specifications

Spec Description
S1Control 1
S2Control 2
S3Feedback 1
S4Feedback 2
S5Feedback 3
S6Feedback 4
S7Default mask
S8Output mask 1
S9Output mask 2
S10Output mask 3
S11Feedback mask 1
S12Feedback mask 2
S13Feedback mask 3
S14Control output status override (see below)
S15
Manual mode permissive
0 = off
1 = on
S16Feedback wait time (seconds)
S17Fault wait time
S18Device driver display type
S19Next allowable mask number for output mask 1 (manual mode)
S20Next allowable mask number for output mask 3 (manual mode)
S21Next allowable mask number for output mask 3 (manual mode)
S22Pulsed output length (sustained outputs at 0)
S23
Initial mode
0 = manual
1 = auto
S24
Start-up track flag
0 = no track
1 = track during start-up
S25Control override

Format for S14

Status override

XX0None
XX1Output status
XX2Output status and alarm

Control override

X0XGo to manual mode and default control outputs
X1XHold current mode and control outputs
X2XGo to manual mode and hold current control outputs
X3XGo to auto mode and set outputs as selected by current control inputs
X4XGo to manual mode and set outputs as selected by operator interface device

Operation

0XXNormal operation
1XXEarly good status enable

Outputs

Block Type Description
N Bit Control 1
N+1 Bit Control 2
N+2 Bit Control 3
N+3 Real
Control status:
0.0 = good
1.0 = bad
2.0 = waiting



DBDOC ©1996 - 2025 G. Michaels Consulting Ltd., all rights reserved. All other trademarks and registered trademarks are the property of their respective holders. Website source largely available under the terms of the AGPLv3.