The user can launch Hyperview via the command line and specify along with it the name of the project file to open, as well as, optionally, a particular document in the project to display when it first opens up. The basic command line configuration is:
"C:\Program Files (x86)\GMCL\DBDOC\Programs\Hyperview.exe" <dbdoc or M14 filename> </document_switch=document_name> </additional_optional_switches>
where <dbdoc or M14 filename> is the location and name of the project file which you wish to open.
Note: Misspelled switch names or switch arguments will be ignored. This will often give unexpected results. Note: The command line that was actually used to run Hyperview can be seen in the About Dialog.
In lieu of the actual dbdoc or M14 filename, you can use the asterisk (*) wildcard to specify which project file to open. The asterisk tells Hyperview to look at all matching project files and open the newest version it can find.
To open the most recently built project file in a specified project directory, regardless of name, you can enter
and Hyperview will look at all existing project files in the directory.
Note: As long as a wildcard is included in the specification, .dbdoc and .M14 are completely interchangeable. For example, if you specify *.M14 but there is a newer .dbdoc file, then it is the newer .dbdoc file that is opened for you. (Or vice versa.)
You can also select specific files by combining the wildcard with other text. For example, if your project name is ATL_1 and your BuildRoot is C:\WORK, then you may specify the filename argument as
and Hyperview will look at all project files with names that start with ATL_1 and open the newest one.
If you do not specify a filename when you launch Hyperview, Hyperview will open the last viewed project file.
<document_switch> is one of the following arguments followed by the document_name (do not include the file extension in the name):
|/doc||Specify a document to open. The optional /type switch specifies the document type to be opened. The first document (of the specified type) that has a name with a leading substring that matches the string specified in /doc will be opened. If /type is not specified, then the first matching document of any type will be opened.||/doc="G1WATER" /type=graphic|
|/tag||Specify a Tag Name to open. An exactly correct specification is required — there is no substring matching. Hyperview will bring up the tag index in the Table of Contents panel and the CAD source (if it exists, otherwise the tag record) in the content pane.||/tag="AMD-108"|
|/block||Specify a loop-PCU-module-block to open. An exactly correct specification is required — there is no substring matching. The index pane will show everywhere the block is referenced. The content pane will display the CAD sheet source of the specified block.||/block="Module 1,1,1 Block 1"|
Document types which can be specified in the /type switch:
|graphic||Conductor/Operate IT/Process Portal B Graphic, i.e. any graphic file with a type of M1, DT, DR, DIS, CTL, PNG, G, or, UCBG||/doc="G1WATER" /type=graphic|
|800xA||Any 800xA graphic, which could be a PG2 graphic or a VB graphic||/doc=pulpers/type=800xa|
|sodg||Any SODG graphic, i.e. any graphic file with a type of DT, DR, or DIS||/doc="G39" /type=sodg|
|vb||800xA VB (Visual Basic) graphic, file type CTL||/doc=pulpers /type=vb|
|splus||S+ (Symphony+) or PGP (Power Generation Portal) graphic||/doc=auxelcov /type=splus|
|pg2||800xA PG2 graphic, file type PNG||/doc=pulpers /type=pg2|
|pgp||PGP (Power Generation Portal) or S+ (Symphony+) graphic, file type G or UCBG||/doc=auxelcov /type=pgp|
|m1||Conductor/Operate IT/Process Portal B Graphic||/doc="g1bfwdar" /type=m1|
|dt||SODG Graphic||/doc="G39" /type=dt|
|dr||SODG Graphic||/doc="G40" /type=dr|
|dis||SODG Graphic||/doc="G41" /type=dis|
|ctl||SODG Graphic||/doc="FIRESYS1" /type=ctl|
|logic||CAD sheet of type CAD or CLD||/doc="1010214A" /type=logic|
|cad||CAD sheet name||/doc="1010214A" /type=cad|
|cld||CAD sheet name||/doc="Control Logic Document 1" /type=cld|
|autocad||Any AutoCAD type file of type DXF, DWG, or DGN||/doc="17HS2W1" /type=autocad|
|dxf||MicroStation/DXF file||/doc="29L107" /type=dxf|
|dwg||AutoCAD file||/doc="17HS2W1" /type=dwg|
|dgn||AutoCAD file||/doc="0021" /type=dgn|
|lad||Ladder rung. (Note that you can specify a particular rung to open with /rung=)||/doc="EVAMTR" /type=lad|
|batch||Batch file. (Note that you can specify a particular unit with /unit)||/doc="1010201A" /type=batch|
|ab||AB file||/doc="addr01a" /type=ab|
|rtu||RTU file||/doc="10209" /type=rtu|
|doc||Any txt (text), rtf, or html file||/doc="notes" /type=doc|
|txt||Text (.TXT) file||/doc="notes" /type=txt|
|rtf||RTF file||/doc="notes" /type=rtf|
|html||HTML file||/doc="notes" /type=html|
|dy||SODG symbol||/doc="atnkfl" /type=dy|
|pnt||Honeywell Point Index||/doc="lime" /type=pnt|
These older document selection switches are no longer supported but may still work.
Note: They will definitely not work in any context where a new Hyperview window is launched from a running Hyperview, for example using the File | New Window command or automatically launching an older version of Hyperview to view an M14 file. If you rely on any of these deprecated switches, please change to the new approach described above.
|graphic||Conductor/Operate IT/Process Portal B Graphic||/graphic="G1WATER"|
|m1||Conductor/Operate IT/Process Portal B Graphic||/m1="G1WATER"|
|cad||CAD sheet name||/cad="1010214A"|
|lad||Ladder rung||/lad="EVAMTR" /rung=48 (Note: You can specify a particular rung to open to)|
|batch||Batch file||/batch="1010201A" /unit=2 (Note: You can specify a particular unit)|
|txt||Text (.TXT) file||/txt="Notes"|
|rtf||RTF file||/rtf="My RTF file"|
<additional_optional_switches> are switches that can be appended to the command line but are not necessary.
|noOpen||Use this switch to launch Hyperview with the Open file menu option disabled. This would prevent a Hyperview user from viewing any project file other than the one specified on the command line.||/noOpen|
|noErrors||Use this switch to launch Hyperview with the Error Browser and error markers disabled.||/noErrors|
|snapshot||This switch makes Continuous Mode live data unavailable. The user will still be able to use Slow Mode live data.||/snapshot|
|update||Enter the frequency in seconds that Hyperview will request live loop information from the CIU. The format will be as follows: /update=||/update=10 (specifies that visible live data values should be fetched each 10 seconds if continuous live loop monitoring is turned on)|
|noedit||With this switch specified, the Open Document and Explore to Document options in the pop-up menu are disabled.||/noedit|
|save||This option allows you to specify a default location where files will be saved (audit window, search results, gather live loop data on the "View" panel, print to file). This is specifed as follows: /save=<directory to save to>.||/save="C:\Users\Bob\Documents\DBDOC\save"|
|MonitorOff||Specify an interval after which live loop monitoring will be turned off. The format should be as follows: /MonitorOff=<time in minutes>. When monitoring is turned on, after the specified interval has elapsed, live loop monitoring will be automatically shut off. Each time the live loop monitoring button is toggled on will result in a fresh live loop monitoring interval.||/MonitorOff=30 (automatically turns off continuous live monitoring after 30 minutes)|
|NewWindow||This option overrides the reuse of an existing active Hyperview window to process the current command line.||/NewWindow|
|datefmt||This option allows the specification of date format as MMDD or DDMM. This specifies the default date format (used in the Watch Window). The date format can also be specified as Default Date Format in the View tab of the Options dialog.||/datefmt=MMDD, /datefmt=DDMM|
|llfontsize||This option allows the live loop annotation text size to be set. This font size can also be specified as Live loop annotation text size in the View tab of the Options dialog. Note that this font size only affects text whose size is not explicitly set during the compile.||/llfontsize=20 (specifies that the default live data font size should be 20).|
|treeview||This option forces the Treeview Table of Contents to be available in DBDOC 11.2. In DBDOC 11.2, the Treeview Table of Contents is no longer available by default, because it has been replaced by hierarchy in the Classic Table of Contents. It will become enabled automatically on some older systems. If you prefer to have the legacy Treeview Table of Contents available in other situations, use the /treeview command line option. In DBDOC 11.3, Treeview Table of Contents is back.||/treeview|
|exportdb||This option causes Hyperview to run in non-interactive (command line only) mode, and export a subset of the dbdoc database to PROJECT.sqlite in the PATH folder. If PROJECT.dbdoc is not specified on the command line, the last opened project will be loaded, the same as when Hyperview is running interactively. The effect of running Hyperview with this option is the same as choosing Export Project Data... from the File menu inside Hyperview. This option is used by BuildPlus to automatically export a database after a build (see Exporting data from .dbdoc files for how to configure your build to do this). Although this option is generally only used internally by DBDOC, it could be used in any context where it is useful to convert a dbdoc database to a readable sqlite database that contains most of the same system information.||[PROJECT.dbdoc] /exportdb=PATH|
All command-line options can be used in a shortcut definition or in a batch file in the same way that they are used on the command line.
Hyperview is commonly run remotely from a shortcut.
Some DBDOC administrators might want to run Hyperview from a batch file, which would allow command line options to be predefined in a somewhat less accessible manner than with a shortcut.
DBDOC ©1996 - 2022 G. Michaels Consulting Ltd., all rights reserved. All other trademarks and registered trademarks are the property of their respective holders. Website source largely available under the terms of the AGPLv3.